AMC610 is a six headphones distribution amplifier rack unit. This unit allows you to feed six headphones from one or more stereo modulation line inputs (Impedance should be from 8 Ohms to 600 Ohms).

• Independent volume control on each headphone.
• Headphone output 1 available on the front panel.
• Our special block diagram configuration allows flexible configurations with front panel access: For each amplifier, it is possible to choose either the modulation from the channel directly located at the left, or the modulation from each channel input (rear panel).

Configuration examples:

• One modulation routed to six headphones.
• Two different modulations routed to two groups of three headphones.
• Three different signals routed to three groups of two headphones.
• Six different modulations routed to six headphones.
• One modulation routed to two headphones and one modulation routed to four headphones.

AMC610 has an order input with an automatic gain reduction of the audio modulation routed to the headphones. Order feeds can be routed either to all headphones, or to headphone 1 only (internal programming).

• General balanced stereo input on XLR, or unbalanced on RCA.
• Direct unbalanced stereo input (for each channel) on RCA.
• XLR balanced Order input.
• RCA unbalanced Order input.
• Stereo 1/4" Jack headphone outputs.

APPLICATIONS:

• Headphone modulation dispatch in broadcast studios.
•  Headphone modulation supply in multimedia environment.
• Headphone dispatching in audio and video environment.