SEL104-2 is an analog audio signal switch, in a single unit 19" rack. It allows to send any balanced input signal (from 10) to a similar output.It works in two different users defined way:

• Normal mode: one input is selected and sent to the output.
• Mixing mode: several inputs are selected and mixed to the output

In case of a power failure, thanks to the "hardware" bypass, SEL104-2 automatically outputs signal from input 1. Furthermore, an advanced "CUE" mode, allows to monitor every input.
Fully independent from the main selection process, the "Cue" mode allows the user to select the input to be monitored. The signal is then routed to the headphone connector, and to the bargraph.
When "Cue" is not active, the output signal is on the headphone connector and the bargraph.
The mode and the selection, are displayed by a three colours signalling system on the switches.
SEL104-2 can be connected to SEL110-2 allowing to route analog or digital signals, and to SEV101, thus handling audio and video signals.

• Ten balanced stereo inputs on removable 6 pins connector and RJ45 plug.
• One main balanced stereo output on XLR.
• One stereo monitor output on SUB-D.
• One headphone stereo connector on front panel for monitoring.

All functions and selections are made in using an RS232 serial connector. SEL104-2 can be activated trough TLC100 interface: 10 channels to remote control and display of selected channel on leds.


APPLICATION:

• Signal routing (One input from 10).